Add to Favorites
marketveda Associated Engineers
Products
Cables, Conductors, Wires & Accessories [4]
Communication Equipment & Components [1]
Electric & Electronic Connectors & Interconnectors [6]
Electric Components, Fittings & Spares [30]
Electric Motors, Components & Accessories [1]
Company Profile
Ratings/Comments
Contact Us
Associated Engineers

Address:
7-C, Hitex Industrial Estate SV Road, Dahisar East Mumbai



View Contact Details
Products
Copper Bonded Earth Rods     

Copper Bonded / Earth Rods are best and most economical earth rods. they are made by molecularly bonding 99.9 % Electrolytic copper high tensile low carbon steel of BS 4360 Grade A. The rods are highly resistance to corrosion and because the steel used has very high tensile strength. The rods can be driven by power hammers to greater depths.

The threads on copper bonded steel earth rods are formed by roll threading and there is 'BUILT IN' driving tip. The roll threads provide extra strength whereby risk of chipping while driving rods in grounds is eliminated.


Bi-Metallic Lugs with centre Palm     

ALUMINIUM BARRELARE CHEMICALLY TREATED TO REDUCE CONTACT RESISTANCE AND CORROSION AND ARE FILLED ELECTRICALLY CONDCTIVE CORROSION INHABITANT WITH A JOINTING COMPOUND AND CAPPED

CONDUCTIVITY :
Aluminium 61.8% IACS (MIN)
Copper 99.7% IACS

CONDUCTIVE MATERIAL :
Aluminium Barrel : 99.6%
Copper Palm : 99.95%
Final Metal State : Fully Annealed, Including Joint.
Joining method : Friction welding, welding area more than nominal conductor area.
Finish natural.

Aluminium barrel are chemically treated to reduce contact resistance and corrosion and are filled electrically conductive corrosion inhabitant with a jointing compound and capped.

NOTE:
1) Combinations of bi-metallic compression joints are designed on the basis of current Carrying capacity of 
    individual cables.
2) In case additional combinations are required same may will be provided against specific request.
3) Shape size and dimensions are subject to change without notice.


Non Tension bi Metallic Compression Joints     

Aluminium barrel are chemically treated to reduce contact resistance and corrosion and are filled electrically conductive corrosion inhabitant with a jointing compound and capped.

CONDUCTIVITY :
Aluminium 61.8% IACS (MIN)
Copper 99.7% IACS
Aluminium barrel are chemically treated to reduce contact resistance and corrosion and are filled electrically conductive corrosion inhabitant with a jointing compound and capped.

CONDUCTIVE MATERIAL :
Aluminium Barrel : 99.6%
Copper Palm : 99.95%
Final Metal State : Fully Annealed, Including Joint.
Joining method friction welding, welding area more than nominal conductor area.
Finish natural.

NOTE:
1) Combinations of bi-metallic compression joints are designed on the basis of current Carrying capacity of 
    individual cables.
2) In case additional combinations are required same may will be provided against specific request.
3) Shape size and dimensions are subject to change without notice.


BI-METALLIC CONNECTOR FOR 25mm X 3mm ALUMINIUM TAPE TO 25mm X 3mm COPPER TAPE CONNECTOR     

CONDUCTIVE MATERIAL :
Aluminium Barrel : 99.6%
Copper Palm : 99.95%
Final Metal State : Fully Annealed, Including Joint.
Joining method friction welding, welding area more than nominal conductor area.
Finish natural.

CONDUCTIVITY :
Aluminium 61.8% IACS (MIN)
Copper 99.7% IACS
Aluminium barrel are chemically treated to reduce contact resistance and corrosion and are filled electrically conductive corrosion inhabitant with a jointing compound and capped.

NOTE:
1) Combinations of bi-metallic compression joints are designed on the basis of current Carrying capacity of 
    individual cables.
2) In case additional combinations are required same may will be provided against specific request.
3) Shape size and dimensions are subject to change without notice.


BI-METALLIC CONNECTOR FOR 8mm DIAMETER ALUMINIUM CONDUCTOR TO 25mm X 3mm COPPER TAP CONNECTOR.     

CONDUCTIVE MATERIAL :
Aluminium Barrel : 99.6%
Copper Palm : 99.95%
Final Metal State : Fully Annealed, Including Joint.
Joining method friction welding, welding area more than nominal conductor area.
Finish natural.

CONDUCTIVITY :
Aluminium 61.8% IACS (MIN)
Copper 99.7% IACS
Aluminium barrel are chemically treated to reduce contact resistance and corrosion and are filled electrically conductive corrosion inhabitant with a jointing compound and capped.

NOTE:
1) Combinations of bi-metallic compression joints are designed on the basis of current Carrying capacity of 
    individual cables.
2) In case additional combinations are required same may will be provided against specific request.
3) Shape size and dimensions are subject to change without notice.


BI-METALLIC CONNECTOR FOR 8mm DIAMETER ALUMINIUM CONDUCTOR TO 8mm DIAMETER COPPER CONNECTOR.     

CONDUCTIVE MATERIAL :
Aluminium Barrel : 99.6%
Copper Palm : 99.95%
Final Metal State : Fully Annealed, Including Joint.
Joining method friction welding, welding area more than nominal conductor area.
Finish natural.

CONDUCTIVITY :
Aluminium 61.8% IACS (MIN)
Copper 99.7% IACS
Aluminium barrel are chemically treated to reduce contact resistance and corrosion and are filled electrically conductive corrosion inhabitant with a jointing compound and capped.

NOTE:
1) Combinations of bi-metallic compression joints are designed on the basis of current Carrying capacity of 
    individual cables.
2) In case additional combinations are required same may will be provided against specific request.
3) Shape size and dimensions are subject to change without notice.


BI-METALLIC CONNECTOR - FLAT TYPE FOR 25mm X 3mm ALUMINIUM TAPE TO 25mm X 3mm COPPER TAPE CONNECTOR     

CONDUCTIVE MATERIAL :
Aluminium Barrel : 99.6%
Copper Palm : 99.95%
Final Metal State : Fully Annealed, Including Joint.
Joining method friction welding, welding area more than nominal conductor area.
Finish natural.

CONDUCTIVITY :
Aluminium 61.8% IACS (MIN)
Copper 99.7% IACS
Aluminium barrel are chemically treated to reduce contact resistance and corrosion and are filled electrically conductive corrosion inhabitant with a jointing compound and capped.

NOTE:
1) Combinations of bi-metallic compression joints are designed on the basis of current Carrying capacity of 
    individual cables.
2) In case additional combinations are required same may will be provided against specific request.
3) Shape size and dimensions are subject to change without notice.


Bi Metallic Pin Connectors     

Aluminium barrel are chemically treated to reduce contact resistance and corrosion and are filled electrically conductive corrosion inhabitant with a jointing compound and capped.


CONDUCTIVITY :
Aluminium 61.8% IACS (MIN)
Copper 99.7% IACS
Aluminium barrel are chemically treated to reduce contact resistance and corrosion and are filled electrically conductive corrosion inhabitant with a jointing compound and capped.

CONDUCTIVE MATERIAL :
Aluminium Barrel : 99.6%
Copper Palm : 99.95%
Final Metal State : Fully Annealed, Including Joint.
Joining method friction welding, welding area more than nominal conductor area.
Finish natural.

NOTE:
1) Combinations of bi-metallic compression joints are designed on the basis of current Carrying capacity of 
    individual cables.
2) In case additional combinations are required same may will be provided against specific request.
3) Shape size and dimensions are subject to change without notice.

.

 


Bi Metallic Lugs with centre Palm     

Aluminium barrel are chemically treated to reduce contact resistance and corrosion and are filled electrically conductive corrosion inhabitant with a jointing compound and capped.

CONDUCTIVITY :
Aluminium 61.8% IACS (MIN)
Copper 99.7% IACS

CONDUCTIVE MATERIAL :
Aluminium Barrel : 99.6%
Copper Palm : 99.95%
Final Metal State : Fully Annealed, Including Joint.
Joining method : Friction welding, welding area more than nominal conductor area.
Finish natural.

Aluminium barrel are chemically treated to reduce contact resistance and corrosion and are filled electrically conductive corrosion inhabitant with a jointing compound and capped.

NOTE:
1) Combinations of bi-metallic compression joints are designed on the basis of current Carrying capacity of 
    individual cables.
2) In case additional combinations are required same may will be provided against specific request.
3) Shape size and dimensions are subject to change without notice.


Special Bi Metallic Lugs     

Aluminium barrel are chemically treated to reduce contact resistance and corrosion and are filled electrically conductive corrosion inhabitant with a jointing compound and capped.

CONDUCTIVE MATERIAL :
Aluminium Barrel : 99.6%
Copper Palm : 99.95%
Final Metal State : Fully Annealed, Including Joint.
Joining method friction welding, welding area more than nominal conductor area.
Finish natural.

CONDUCTIVITY :
Aluminium 61.8% IACS (MIN)
Copper 99.7% IACS
Aluminium barrel are chemically treated to reduce contact resistance and corrosion and are filled electrically conductive corrosion inhabitant with a jointing compound and capped.

NOTE:
1) Combinations of bi-metallic compression joints are designed on the basis of current Carrying capacity of 
    individual cables.
2) In case additional combinations are required same may will be provided against specific request.
3) Shape size and dimensions are subject to change without notice.


Reverse Bi-Metallic Lugs     

Aluminium barrel are chemically treated to reduce contact resistance and corrosion and are filled electrically conductive corrosion inhabitant with a jointing compound and capped.

CONDUCTIVE MATERIAL :
Aluminium Barrel : 99.6%
Copper Palm : 99.95%
Final Metal State : Fully Annealed, Including Joint.
Joining method friction welding, welding area more than nominal conductor area.
Finish natural.

CONDUCTIVITY :
Aluminium 61.8% IACS (MIN)
Copper 99.7% IACS
Aluminium barrel are chemically treated to reduce contact resistance and corrosion and are filled electrically conductive corrosion inhabitant with a jointing compound and capped.

NOTE:
1) Combinations of bi-metallic compression joints are designed on the basis of current Carrying capacity of 
    individual cables.
2) In case additional combinations are required same may will be provided against specific request.
3) Shape size and dimensions are subject to change without notice.


Bi Metallic Lugs With Extended Palm     

Aluminium barrel are chemically treated to reduce contact resistance and corrosion and are filled electrically conductive corrosion inhabitant with a jointing compound and capped.

CONDUCTIVITY :
Aluminium 61.8% IACS (MIN)
Copper 99.7% IACS

CONDUCTIVE MATERIAL :
Aluminium Barrel : 99.6%
Copper Palm : 99.95%
Final Metal State : Fully Annealed, Including Joint.
Joining method : Friction welding, welding area more than nominal conductor area.
Finish natural.

Aluminium barrel are chemically treated to reduce contact resistance and corrosion and are filled electrically conductive corrosion inhabitant with a jointing compound and capped.

NOTE:
1) Combinations of bi-metallic compression joints are designed on the basis of current Carrying capacity of 
    individual cables.
2) In case additional combinations are required same may will be provided against specific request.
3) Shape size and dimensions are subject to change without notice.


Ring Type Bi Metallic Lugs     

Aluminium barrel are chemically treated to reduce contact resistance and corrosion and are filled electrically conductive corrosion inhabitant with a jointing compound and capped.

CONDUCTIVE MATERIAL :
Aluminium Barrel : 99.6%
Copper Palm : 99.95%
Final Metal State : Fully Annealed, Including Joint.
Joining method friction welding, welding area more than nominal conductor area.
Finish natural.

CONDUCTIVITY :
Aluminium 61.8% IACS (MIN)
Copper 99.7% IACS
Aluminium barrel are chemically treated to reduce contact resistance and corrosion and are filled electrically conductive corrosion inhabitant with a jointing compound and capped.

NOTE:
1) Combinations of bi-metallic compression joints are designed on the basis of current Carrying capacity of 
    individual cables.
2) In case additional combinations are required same may will be provided against specific request.
3) Shape size and dimensions are subject to change without notice.


Tinned copper heavy duty cable terminal ends with inspection slot     

MATERIAL : COPPER TUBE TO BS 1977/ ISI 191 (PART V) E.C. GRADE 99.25 % IACS

FINISH : ELECTRO TINNED TO BS 1872 (1984)

TINNED COPPER HEAVY DUTY TERMINAL ENDS


Copper Tube Terminal Light Duty     

MATERIAL : ELECTROLYTIC COPPER FINESH : ELECTRO TINNED

  


Crimping Type Tinned Copper Transformer Terminal Ends     

MATERIAL ELECTROLYTIC COPPER FINISH : CLECTRO TINNED

 


Aluminium tube Terminals Two Holes     

MATERIAL : ELECTROLYTIC ALUMINIUM TO IS 5082 FINISH : NATURAL


Copper Tube in Line connector     

MATERIAL : ELECTROLYTIC COPPER FINISH : ELECTRO TINNED


Aluminium tube Terminals     

MATERIAL ELECTROLYTIC ALUMINIUM TO IS 5082 GR TI-E-IS 8309 FINISH : NATURAL


Aluminium Ferrules For Aluminium Xlpe Conductors     

MATERIAL : ELECTROLYTIC ALU TO IS 5082 GR TI-E-EIS 8309 FINISH : NATURAL


Fork Terminal     

MATERIAL : ELECTROLYTIC COPPER FINISH : ELECTRO TINNED


Ring Terminal (Non - Insulated)     

MATERIAL : ELECTROLYTIC COPPER FINISH : ELECTRO TINNED


END SEALING FERRULES     

MATERIAL : ELECTROLYTIC COPPER BS 1977 / IS 191 (PART V)


Ring Terminal     

NON-INSULATED                 INSULATED                    PRE-INSULATED


Pin Terminal     

MATERIAL : ELECTROLYTIC COPPER FINISH : ELECTRO TINNED


Fork Terminal     

MATERIAL : ELECTROLYTIC COPPER FINISH ELECTRO TINNED


Insulated end Sealing Ferrules / Bootlace Pins     

MATERIAL : ELECTROLYTIC COPPER BS 1977 / IS 191 (PART V)


Split Bolt Connectors     

MATERIAL : EXTRUDED / FORGED BRASS SECTION BS 2874 FINISH : ELECTRO - TINNED / UNTINNED


Twin Insulated Boot Less Pin Terminals     

The twin wire Boot Less Pin Terminal range is speacially designed to terminate 2 wires in the sameterminal. With the development of smaller switches & devices, housings have beome smoller. The twin wire Boot Less Pin Terminal solves these Problems in a quick and easy way.

MATERIAL : ELECTROLYTIC COPPER BS 1977 / IS 191 (PART V) 
FINISH : ELECTRO TINNED

Size 0.5 mm2 to 6 mm2 are available with colour codin


CABLE GLAND CW TYPE     

SIZE 20S, 20L, 25S, 25L, 32S, 32L, 40S, 40L, 50S, 63L, 75S, 75L, 90S & 90L ARE MANUFACTURED AGAINST ORDERS


CABLE GLAND BW TYPE     

SIZE 20S, 20L, 25S, 25L, 32S, 32L, 40S, 40L, 50L, 5OS, 63S, 63L, 75S, 75L, 90S & 90L ARE MANUFACTURED AGAINST ORDERS


PVC SHROUD     

PVC SHROUD


EARTH TAG     

EARTH TAG


CHECK NUT     

CHECK NUT


Couplers     

COUPLERS ARE MADE FROM BRASS. DRIVING HEAD IS REUSABLE AND MADE FROME HIGH TENSILE STEEL.

NOMINAL DIA MM              CAT NO.
1/2" COUPLING                     JC - 1
5/8" COUPLING                     JC - 2
3/4" COUPLING                     JC - 3
1/2" DRIVING STUD              JD - 1
5/8" DRIVING STUD              JD - 2
3/4" DRIVING STUD              JD - 3


Solid Copper Bonded Earth Rod     

Solid copper earth rods are manufactured in both the types with external threads and internal threads. The rods are used where soil conditions are very aggressive and corrosion is very high such as soils with high salt content Copper rods gives exceptionally long life. The rods are manufactured from high conductivity hard drawn copper to BS 2874-C101.

ROD DIA (mm)      LENGTH (mm)          Cat No.
15                                1200                    JCR - 1
15                                1500                    JCR - 2
20                                1200                    JCR - 3
20                                1500                    JCR - 4


Fittings     

1)DRIVING HEAD & DRIVING SPIKE ARE MADE OUT OF HIGH TENSILE STRENGTH STEEL.
2)INTERNAL COUPLING IS MADE FROM PHOSHPER BRONZE OR HIGH TENSILE BRASS      DOWEL AND EXTERNALLY THREADED.


Fittings     

1)DRIVING HEAD & DRIVING SPIKE ARE MADE OUT OF HIGH TENSILE STRENGTH STEEL. 
2)INTERNAL COUPLING IS MADE FROM PHOSHPER BRONZE OR HIGH TENSILE BRASS      DOWEL AND EXTERNALLY THREADED.


Fittings     

1)DRIVING HEAD & DRIVING SPIKE ARE MADE OUT OF HIGH TENSILE STRENGTH STEEL. 
2)INTERNAL COUPLING IS MADE FROM PHOSHPER BRONZE OR HIGH TENSILE BRASS      DOWEL AND EXTERNALLY THREADED.


Clamps     

VARIOUS TYPES OF EARTH CLAMPS ARE MANUFACTURED IN BRASS AND GUNMETAL. THE CLAMPS FOR EARTH TO CABLE CONNECTION, EARTH ROD PLATE CONNECTION EARTH ROD TO CABLE LIG CONNECTION ETC. ARE MANUFACTURED AS SHOWN IN FIGURE.

Copper-Aluminium Bi Metal Lugs     

Aluminium Barrel are chemically treated to reduce contact resistance and corrosion and are filled electrically conductive corrosion inhabitant with a jointing compound and capped.

CONDUCTIVE MATERIAL :
Aluminium Barrel : 99.6%
Copper Palm : 99.95%
Final Metal State : Fully Annealed, Including Joint.
Joining Method : Friction Welding, Welding Area More Than Nominal Conductor Area.
Finish : Natural.

Conductivity :
Aluminium61.8% Iacs (Min)
Copper99.7% Iacs


Bimetallic Compression Reducers     

Aluminium barrel are chemically treated to reduce contact resistance and corrosion and are filled electrically conductive corrosion inhabitant with a jointing compound and capped. 

CONDUCTIVITY :
Aluminium 61.8% IACS (MIN)
Copper 99.7% IACS

CONDUCTIVE MATERIAL :
Aluminium Barrel : 99.6%
Copper Palm : 99.95%
Final Metal State : Fully Annealed, Including Joint.
Joining method : Friction welding, welding area more than nominal conductor area.
Finish natural.

NOTE:
1) Combinations of bi-metallic compression joints are designed on the basis of current Carrying capacity of individual cables.
2) In case additional combinations are required same may will be provided against specific request.
3) Shape size and dimensions are subject to change without notice.


Copyright © 2011-12 MARKETVEDA.COM. All rights reserved.| Terms of Use Privacy Policy | Maintained By iLoopWorld.